-----Original Message-----
>From: G-IANI <g-iani@ntlworld.com>
>Sent: Dec 16, 2011 1:56 AM
>To: europa-list@matronics.com
>Subject: Europa-List: RE: Dynon AHAHRS question
>
>
>A question to all those who have done this already.
>
>Where did you locate the ADAHRS unit for your Dynon?
>
>Obviously each aircraft will have more or less spots available which meet
>the criteria depending on other options such as 914 pumps, autopilot servos
>etc. It would be useful advice for builders if we have a spot we could
>recommend.
>
>
>Ian Rickard G-IANI XS Trigear, 300hours
>Europa Club Mods Specialist
>e-mail g-iani@ntlworld.com
>
>
Ian,
I have just installed mine and I put it on the ceiling in baggage bay area, this
being the most benign magnetic area. You could do it just in front of or behind
this bulkhead. Using the Dynon 15 foot harness it works out fine. For
brackets,
its easy enough to make 5 ply bid layup over some appropriately sized
box tubing and then use them glued to the ceiling. Also smart to devise a means
for slight adjustments, as you have read, the ADAHRS module needs to be within
1 degree of pitch and yaw axis. And this location is easily with in the
distance from cg requirements. Handy to use 90 degree angle tubing fittings for
connections.
Bill McClellan
A164XS Conventional gear Jabiru powered.
|