Jeff,
Are those brass? You should be able to fashion one from brake line
tubing (or brass tubing) from local auto parts house. They should have
a line bending tool, too. The stuff is really cheap...
Jeff - Baby Blue
On 10/18/2010 8:59 AM, JEFF ROBERTS wrote:
>
> HI All,
> I was needing to replace one of the bent tube assemblies that the choke
> cable runs thru at the carb. I figured a little soft brass tube part
> can't be but a few bucks so I called Lockwood. WOW! $41.00 each! The
> thing is 3 inches of bent 1/4 inch brass.
>
> Has any one replaced these with their own assembly? I have an idea of a
> bracket that would be stronger and more secure but I thought I would
> check in on the list to see if others have come up with somethings first.
>
> I can afford the part but I hate being raped just because they can. Get
> that enough from the government!
>
> Thanks in advance!
>
> Jeff R. N128LJ Gold Rush
>
>
|