Re: Europa-List: turbo control motor switch

[ivor.phillips@ntlworld.com]

All I did Ferg was put a small push button switch (to open) in the feed to the
servo, apparently this is in case the servo starts to hunt!   Just press the 
button
and the servo will reset it self, Never needed to use it so far :-)
regards
Ivor

>       Is it me?
>       In aligning the switches and allowing for spares etc., I came across
> an admonition to interrupt the wires #14 & #2 'twixt turbo motor and control
> box with an ON/OFF switch.