Mine is the same. With flaps fully retracted the bottom of the flaps and
ailerons line up nicely with the wing.
I planned on doing the fill and sanding on the wing as one piece, with so
its as good as it can be.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of
DuaneFamly@aol.com
Sent: Sunday, 15 March 2009 11:04 AM
To: europa-list@matronics.com
Subject: Europa-List: Aileron Thickness
Good day All,
Quick question........when I install my ailerons, the top surface of each
aileron is lower than the trailing edge of the wing.....how much is
acceptable? Should it be filled with micro to make it flush with the wing
trailing edge and then tapered to the aileron trailing edge?
Mike Duane A207A
Redding, California
XS Conventional Gear
Jabiru 3300
Sensenich R64Z N
Ground Adjustable Prop
----------------------------------------------------------------------------
--
Need a job? Find employment help in your area.
|