- and so did I, and connected it to Grand Rapids EIS, one of
the
spare input channels. It took some trial and error, with the sensor
immersed in boiling hot water and at lower temperature, to find the two
parameters to insert into the GR for fairly accurate reading (not linear
output over the entire range, so the upper one is the more important, of
course). I inserted the T with the sensor in the coolant hose going
from
top of the aft right cylinder (the highest CHT on my 912 ULS) to the
black
collector tank on top of the engine. I operate on 50/50 water/glycol,
and
it is nice to have a good read on the coolant temperature, even though
only
---From one cylinder. It will very quickly pick up any malfunction in the
common cooling system.
Svein
LN-SKJ
_____
Fra: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] P=E5 vegne av danny
shepherd
Sendt: 20. februar 2009 19:26
Til: europa-list@matronics.com
Emne: Re: Europa-List: Coolant temperature indicator
Hi Frans,
I fitted a coolant temperature gauge from Skydrive UK.
skydrive.co.uk The complete kit was about 50 UK pounds. Works very well.
Danny G-c.e.r.i
|