Greg Fuchs a crit :
>
> Graham,
> Thanks, at least I know now that the original Fein tool works.
> It does seam like it would work with fiberglass like a knife through butter.
> Regards,
> Greg
>
> (original message reproduced)
>
>> The Fein saw is an oscillating saw which seems to cut through many hard
>> surfaces, including fiberglass. When it appeared on a TV commercial, I
>> wanted to buy this saw to try on the Europa, until the large price tag ( I
>> think it was around $350 US dollars, or so. Ian Rickard discussed this saw
>> on page 12 of the December issue of The Europa Flyer.
>>
>
>
>> I noticed that there is a knock-off of this saw at Harbor Freight. It is
>> new to them, and appeared in the adds over Christmas on sale for 39.99
>> (down from 49.99). If anyone has tried this saw to check its
>> reliability/working, let me know. Meanwhile, I am in no hurry, and waiting
>> for it to go on sale again.
>>
>
>
>> Thanks,
>> Greg Fuchs A050
>>
>
> I have a Fein Tool, it is superb but as you say Expenive!! So are the
> cutters for it. It does work though and there are a few jobs it will
> make easy so it would be a good investment.
> I don't know anyone who has tried the Harbor Freight tool yet.
> Graham
>
>
>
Hi all,
I use a fein saw since 15 years it is a perfect tool.
and very efficient for fiber glass.There is different shapes of blades,
a little piece of advise with each blades, make a training with sheet of
material before use on the aircraft piece.
Good work
Builder N145
--
--|--
--------(*)--------
Michel AUVRAY
mau11@free.fr
|