Hi Paul,
Common problem on the Rotax tacho- swap the signal leads over at the
connecting plug. That normally fixes it. If it does not , it is a tacho
change.
Brian Davies
_____
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Jim Brown
Sent: 29 October 2008 00:33
Subject: Re: Europa-List: Rotax Tacho
Paul
I thank Jim Butcher had the same problem. He has the Blue Mtn EFIS and was
having some problems with the tach reading incorrect.
I have not seen any postings from him lately.
Jim are you still out there ???
Jim Brown
--- On Tue, 10/28/08, Paul Stewart <europa@pstewart.f2s.com> wrote:
From: Paul Stewart <europa@pstewart.f2s.com>
Subject: Europa-List: Rotax Tacho
Date: Tuesday, October 28, 2008, 5:48 PM
<europa@pstewart.f2s.com>
Have just run the engine for the first time (914). All seems well with
exception of rotax tacho. Advancing throttle from 'rough running' to
just smooth, the tacho jumps from <2000rpm to 4000rpm - numbers which
I just don't believe. Anyone got any thoughts?
Unfortunately the rest of our engine instruments are a BMA EFIS1 which
doesn't easily support an alternative tacho for the rotax.
Regards
Paul
D========================
=========
D========================
=========
D========================
=========
D========================
=========
Checked by AVG - http://www.avg.com
21:20
|