Thank you very much Raimo...I'm working on a fuselage/wing fillet and
have been uncertain as to how much of it becomes part of the wing, part
of the flap, and part of the fuselage. Ground clearance w/ flaps
deployed is an important factor.
Fred
A194
On Monday, May 19, 2008, at 11:10 US/Pacific, Raimo Toivio wrote:
> I measured it today and it was exatly 290 mm (=11,42").
> Measured from the ground to the innnermost flaps trailing edge corner.
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
|