Craig
4 or 5 plies of UNI carbon would have worked too
Graham
craig bastin wrote:
>
>
> *Well here is my fix for the bulging doors, a piece of 3mm x 12mm
> alluminium*
> *reduxed and flush rivetted, clears the door sill by about 3mm, door
> was*
> *slightly over flattened with a straight edge and clamps alloy bent
> to be about*
> *3mm flatter than the curve through the door opening. doors are now
> even and flush*
> *right along the opening with seals in place. Overall weight
> increase 80g per door.*
> **
> *craig*
>
>
> ------------------------------------------------------------------------
>
--
Graham Singleton
Tel: +441629820187
Mob: +447739582005
|