Phil,
I found that household cleansers, such as "Comet" worked best,
depends a bit on the parts in question and how contaminated they are,
needs to be well rinsed.
Acetone seemed to evaporate too quickly, and spread the grease around.
Auto body shops sell water soluble cleaners, these work well.
Before bonding, take a water spray bottle and spray on the surfaces.
If clean the water will lie flat,
if dirty, the water will bead.
Dave A061
On 9-Mar-08, at 11:16 AM, flyingphil2 wrote:
> <ptiller@lolacars.com>
>
> Hi,
>
> I'm about to start sticking stuff !
>
> I need to de-grease the parts first. I've had a look round at
> various data sheets and note that Acetone is pretty much the best
> option. I do have a source for this but has anybody in the UK used
> any proprietary de-greasing agents and if so, what?
>
> Thanks,
>
> Phil
>
>
> Visit - www.EuropaOwners.org
>
>
|