Jim & Craig
forgot to mention in my last remark, don't put the third hinge in the
middle for resonance reasons. Vibration will be damped with the hinge
off centre
Graham
jimpuglise@comcast.net wrote:
> Craig-
>
> I am at about the same place you are and added a third hinge close to
> the wingtip. When I did my initial fitting, the tip drooped about
> 3/16. It appeared to me more like the aileron was warped than just
> sagging. In retrospect, I would have been better off moving the center
> hinge a few inches inboard before I did so. It sounds like you are on
> the right track. The hinge material BTW is standard issue from AS.
>
> Jim Puglise A-283
>
> >>
>
> *
>
>
> *
--
Graham Singleton
Tel: +441629820187
Mob: +447739582005
|