Paul,
Thanks for the photo's, it looks like a good way to go..I too am using
the AeroQuip, so I'll give it a shot.
Thanks again,
Ralph
Paul McAllister wrote:
>
> Hi Ralph,
>
> Take a look at http://europa363.versadev.com/ under January 2004 and you
> will see a few photographs on how I routed mine.
>
> >From the sump, I ran mine around the port side then up the back of the
> engine to the oil tank. I used Aeroquip 666 teflon hose and after 3 years /
> 650 hours it is holding up nicely.
>
> Regards, Paul
>
>
>
|