Hi Paul,
I am just wiring a Flightcom 403 to a Filser ATR 600 for some one at the
moment.
The connections according to the diagrams are:
Ptt transmit keyline pin 8 flightcom to pin 10 Filster (with shield wire
if used to Filster pin 1 or 9).
Mic transmit audio Flightcom pin 16 & 17 to Filser pin 6 (with shield to
Filser pin 5).
Receive audio Flightcom pin21 to Filser pin 14 (with shield to Filser
pin1 or 9).
You will have to deactivate the Filser vox intercom by setting the vox
level to 01.
Hope this helps.
Geoff Leedham
G-EOFS trigear 914
----- Original Message -----
From: MR PAUL MITCHELL
To: Europa list
Sent: Tuesday, February 13, 2007 8:02 AM
Subject: Europa-List: Filser ATR600 with Flightcom 403mc intercom
Gents, I need help.
I am involved in a radio installation and the aircraft owner has
decided on and purchased the Filser ATR600 radio which has a built in
intercom but no provision to put in any auxiliary audio inputs such as
Mark Burtons talking ASI device so were advised that we needed a
Flightcom 403mc intercom device, also purchased. The thought being that
the radio would talk to the intercom which would take care of the
auxiliaries. I have a schematic for both devices but do not have the
expertise to know pin for pin how to connecting them together.
Can anyone help, Please.
Paul Mitchell
-------------------------------------------------------------------------
-----
12/02/2007 13:23
|