Graham,
What is your view on the Mod 72 method of protection? The spec calls for
painting all surfaces with etch primer, allowing it to dry and then applying
the ACF 50 before assembly. If the insert is a tight fit, presumably it
will skin the etch primer back to the metal as it enters the frame tube. I
like Ron's idea of assembling the inserts with the paint on both surfaces
still wet. What is your opinion?
Regards,
William
----- Original Message -----
From: "Graham Singleton" <grahamsingleton@btinternet.com>
Sent: Thursday, February 08, 2007 12:38 PM
Subject: Re: Europa-List: Corrosion Proofing
> <grahamsingleton@btinternet.com>
>
> Ron & all
> DPLF or os ot DP40 in UK? is good stuff, however one other thing to
> remember is that you must NOT sand it. It will become permeable if you do.
> AS I understand it it's designed to be a very thin impermeable membrane,
> so don't flat it off after it dries.
> Graham
>
> rparigor@suffolk.lib.ny.us wrote:
>>
>> Hello Phil
>>
>> >
>> My favorite corrosion protect ant is PPG DPLF! It is a 2 part epoxy
>> primer, it does not let in moisture. If you scuff surface it sticks
>> better
>> than any paint I have tried. Works on aluminium, steel and fiberglass.
>> Downright amazing. It does not have UV inhibitors though.
>>
>>
>> Ron P.
>>
>>
>
>
>
|