> if someone could provide the appropriate specs for the nut, size & thread
> pitch
so I can locate a suitable replacement.
>
Hi Bob,
The Installation Manual latest edition says on pages 94-95
"M6 screw (tightening torque 4 Nm (35 in.lb))"
Be careful, as the previous edition was giving 8 Nm (70 in.lb).
This edition is downloadable from the Rotax Owner site of the
"Downloads" page on my website
http://contrails.free.fr/download.php
Of course you just need the metric M6 nuts. M6 means 6 mm diameter, 1 mm
pitch. As for the washer, it needs a 6 mm internal diameter.
Hope this helps,
Merry Christmas and Happy New year,
Regards,
Gilles
http://contrails.free.fr
|