Gottfried,
Thanks for the info. Just had a look at the Filser site.
The ATR 600 and TRT 800 will do the job nicely, and as you say cheaper
:-) . I wonder if our "great British customs" will lump a bit on top :-(
Danny
Ing. Gottfried Komaier wrote:
>
> Hi Danny,
>
> The Filser TRT 600 will be no longer offered by Filser. The TRT 600 was the
> old generation. And about the price: Filser will sell you the TRT 800 at
> 246.- ukp cheaper!
> Why do you want the Becker AR 4201? The Filser ATR 600 is 174.-kp cheaper
> and is a newer generation as well.
>
> To make a long story short: Have a look at www.filser.de/onlineshop/ and you
> will see, what you are looking for.
>
> Cheers,
> Gottfried
>
>
> -----Ursprngliche Nachricht-----
> Von: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] Im Auftrag von
> danny@mcwalterscafe.co.uk
> Gesendet: Samstag, 09. Dezember 2006 15:54
> An: europa-list@matronics.com
> Betreff: Re: AW: Europa-List: avionics cut outs
>
> --> <danny@mcwalterscafe.co.uk>
>
> No, it's the Filser TRT 600. as advertised in "afeonline.com" 200 ukp
> cheeper !!!
>
> Ing. Gottfried Komaier wrote:
>
>> --> <gottfried.komaier@gmx.net>
>>
>> Hi Danny,
>>
>> Did you mean Filser TRT 800 Transponder?
>>
>> Gottfried
>>
>> -----Ursprngliche Nachricht-----
>> Von: owner-europa-list-server@matronics.com
>> [mailto:owner-europa-list-server@matronics.com] Im Auftrag von
>> danny@mcwalterscafe.co.uk
>> Gesendet: Samstag, 09. Dezember 2006 14:45
>> An: matronics
>> Betreff: Europa-List: avionics cut outs
>>
>> --> <danny@mcwalterscafe.co.uk>
>>
>> Hi All,
>> I'm just getting to the point of digging deep into the
>> proverbial pocket and order the avionics. I was thinking of fitting
>> the Becker 4201 and the Filser TRT 600. both these units require 2 1/4
>> in cut outs in the avionics panel. I have the aluminum removable panel
>> from Europa. My question is, whats the best way of cutting the holes ?
>> and whats your opinion of these two units ? I know we don't have to
>> fit mode S yet, but I fear it's coming !!
>>
>> Cheers Danny G-c.e.r.i
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
|