just a thought - could it be the ends of the screws? For which you have to
drioll holes in the LE of the aileron
_____
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
SPurpura@aol.com
Sent: 27 September, 2006 20:03
Subject: Re: Europa-List: aileron fitting to wing
In a message dated 9/27/2006 1:40:32 PM Pacific Daylight Time,
fklein@orcasonline.com writes:
the travel is restricted when the leading edge of the aileron
slams into the wing/aileron closeout with the aileron in the "up"
position (with only 20 degrees of travel)
Can you elaborate on this Fred,mabey your hinge point is off or would
triming back the top skin or extending lower skin help?
|