Hi All,
Just started plumbing the vacuum system. I find I'm having
problems fitting the connectors to the back of the AH and the DI. I'm
using falcon gauges, GH02V-3 and DG02V-3. also the vacuum pump kit
supplied by Europa. fitting the connector on the inlet on the AH
would touch the firewall and therefore the pipe would bend and restrict
the vacuum. The connectors for the DI have"T" pieces on then to connect
to the gauge, I can screw one in but the "T" piece stops me screwing in
the other. Hope this makes sense. Those who have done this job will
probably understand what I'm going on about.
Any ideas and help would be most welcome.
Danny G-c.e.r.i
|