Check your bowden-cable between TCU/Wastegate.....
Special attention arround exhaust-area.
Have had the same problem and that was caused to a hot-spot on the
backside of the bowden where it was routet to close to echaust#3.
regards Gert
#151 / OY-GDS
Den 26/07/2006 kl. 10.41 skrev Simon Smith:
> Someone recently suggested MouseMilk oil (available from LAS) as a
> cure.
>
> Simon
> -----Original Message-----
> From: owner-europa-list-server@matronics.com [mailto:owner-europa-
> list-server@matronics.com] On Behalf Of Ray Stevenson
> Sent: 26 July 2006 08:57
> To: 'europa-list@matronics.com'
> Subject: Europa-List: Turbo problems 914 - Help!!
>
> We have a Europa 914 turbo and are experiencing intermittent high
> boosts. So far we have pointed the finger at the wastegate failing
> to open and close properly. Could this be the only way this
> problem could occur? We have checked that the servo motor is
> functioning correctly and also checked all the wiring joints to it.
> Has anyone else had similar problems? If so we would welcome any
> suggestions. - Ray
>
>
E mail: lgds@post6.tele.dk
http://home19.inet.tele.dk/dalgaard/oygds.jpg
| 