I agree with William. Very easy to use. I followed their recommendation
on where to mount the accellerometer - removed the vacuum pump and used
its bolt holes. The instructions are good on how to use the various
optional displays, etc. Particularly liked the frequency analyzer part,
useful for better understanding of the cause(s) of any vibrations you
will feel (e.g. prop. induced and/or low-frequency structural vibrations
caused by engine/prop.) EAA Chapter Norway just bought this analyzer
for use by its members.
Regards,
Svein
Ground testing on-going
----- Original Message -----
From: William Mills
To: europa-list@matronics.com
Sent: Wednesday, July 12, 2006 7:19 AM
Subject: Re: Europa-List: PB 1 Propeller balancer
It gives excellent results and is easy to use. Mark has developed it
on his and many other Europas over the past four years.
Regards,
William
----- Original Message -----
From: Paul McAllister
To: europa-list@matronics.com
Sent: Wednesday, July 12, 2006 3:51 AM
Subject: Europa-List: PB 1 Propeller balancer
Hi All,
Has anyone had any experience with the PB1Propeller balancer from
Smart Avionics, good or bad ?
Thanks, Paul
|