Hi Gilles,
Yes the gate lever is moving and the wheele is moving. The noise I was
concerned with was after the cycle had occured. Mike and Paul had observed
likewise and hadn't had any probles is seems.
craig ellison
A205
----- Original Message -----
From: "Gilles Thesee" <Gilles.Thesee@ac-grenoble.fr>
Subject: Re: Europa-List: 914 TCU Servo
> <Gilles.Thesee@ac-grenoble.fr>
>
> Craig Ellison a crit :
>
>><craig.ellison2@verizon.net>
>>
>>914 Builders,
>>
>>I've been going through the final install and have a question about the
>>wastgate servo. When I switch on the TCU and it cycles the wastegate the
>>panel lights(red & yellow) both come on the go off as expected but the
>>servo
>>does this huming sound like it is trying to do something. Is this normal?
>>
>>thanks for all advice in advance,
>>
>>
> Craig,
>
> Did you confirm the wastegate lever is actually cycled, and/or the servo
> wheel is moving when the servo cycles ?
> Or do you have the impression the servo is only *trying* to move ?
> In our aeroplane it makes some very slight noise, but it sounds like a
> *normal* servo noise, not as if it was binding or something.
>
> Regards,
> Gilles Thesee
> Grenoble, France
> http://contrails.free.fr
>
>
>
|