The easiest way is to go to the guy on this list and ask him what he is
using and order springs to the same specifications.
Steve Hagar
hagargs@earthlink.net
> [Original Message]
> From: N55XS <topglock@cox.net>
> To: <europa-list@matronics.com>
> Date: 11/1/2005 6:24:37 PM
> Subject: Re: Europa-List: Springs
>
>
> Steve,
>
> How would one go about determining the technical requirements for the
> Europa springs?
>
> Jeff - N55XS
> 99.9 hours
>
> Steve Hagar wrote:
>
> >
> >In my job as a manufacturing engineer in a plant I have occasion to use
different springs. The characteristics of the spring are wholly determined
the material, diameter of the wire and diameter of the coil. There arre
several if not many houses out there who do nothing but wind springs. Many
are standard and do not have to be specially made. In following this thread
about the springs I seem to get the impression that every one thinks there
is a special recipe to get these springs from a special unique supplier.
What you want is an extension spring with a certain diameter wire, certain
diameter coil and of a certain length. You can call Lee Spring, or Capitol
spring or many others to see if is one of their stock units or what it
would take for them to wind it special which they do all the time. You can
find them on the internet.
> >
> >Steve Hagar
> >A143
> >Mesa, AZ
> >
> >
> >Steve Hagar
> >hagargs@earthlink.net
> >
> >
> >
> >
>
>
> --
>
>
|