fluid -
> I would like to use an Andair FS20X2 gas valve with a
> 914 Rotex - do I need the valve version with the return
> lines? It appears you do not need a valve on the
> return line - just a straight shot to the reserve tank.
>
Dunno
>
> On the Jamarperformance brake cylinders (the one
> supplied by the factory for the finger brakes) do I
> need two brake reservoirs?
NO - there is only one connector for a reservoir and it
goes into both
master cylinder bores
>
> Brake fluid - where do I get silicon brake fluid? I
> assume this is the way to go with the Jamar/Matco
> parking brake/factory trigear brakes. Any ideas on the
> type of brake lines to use? Are race car quality worth
> the extra expense?
It is - in theory ! DOT 5.0. Not DOT 5.1 or 4.0 or 3.0.
>
> Thanks for any help
>
> Gary Leinberger A237 Motorglider with 914
Richard
|