Hi Paul,
When I did the tail plane I used Hibuild primer from SP System +
expancel, not too much just a small portion and a thin steal squeezer.
All pin hole was removed in no time. I did this between primer layers. I
will get rid of
all pin holes before the first primer layer on flaps/aileron/rudder.
If this works with superfil I do not know but with the epoxy/expancel
mixture it works perfect
Hope you get rid of your pin holes.
Stephan.
Engine and instrument panel stage
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Paul
Stewart
Subject: Europa-List: pin holes
<europa@pstewart.f2s.com>
A plea for help from anyone who has used 'Superfil'. I have small areas
which are riddled with pin holes and have tried a variety of ploys to
get rid of them:
1. Filling them with more superfil - they are still there
2. Using a brushing pin hole filler (Aerodur) - they are still there
3. Taking all the affected filler back to the glass and starting again -
they are still there
What is particularly irritating is that most of the surface is fantastic
- only small localised areas are affected. Having now spent about 4
months filling and sanding the tail planes alone, the local asylum is
looking more inviting than the work shop. Any suggestions?
Regards
Paul
G-GIDY
|