Jeremy
Where the flap cross tube is depends upon where the main wing pins were
drilled in your cockpit module. Mine were high - I had to make bulge in the
top of my extended baggage bay console to make room for the flap drive
rod-end! And I could only with difficulty sight accross under the fuse to
set the bearings.
J R (Bob) Gowing, UK Kit 327 in Oz
----- Original Message -----
From: "Jeremy Davey" <EuropaFlyer_3@msn.com>
Subject: Europa-List: Flap drive tube clearance to fuselage floor
>
> Guys,
>
> A quick one for those who have been there, done that=85
>
> Can anyone give me the approximate clearance between the lowest point in
the
> vee of the flap drive cross tube FL15 and the fuselage floor in both the
> flaps-retracted and flaps-fully-down positions?
|