MJKTuck@cs.com wrote:
>
>Hi Folks,
>
>Anyone else wired up an Icom A-200? The instructions ask for two pairs of 18
>swg for power and ground. By that I assume they mean one pair of 18 swg wires
>for power and one pair of 18 swg wires for ground.
>
>Power goes to two pins (14 & R) and ground to four pins (6,15,F & S). Do all
>these pins have to carry two 18 swg wires? I think I might have trouble
>getting two wires into the Molex pin and fit in the plastic Molex connector.
>
>Any advice would be appreciated.
>
>Regards,
>Martin Tuck
>N152MT
>
>
>
>
Martin,
I wired my A200 exactly as per instructions, through an ACS 400
intercom. Works like a charm... :)
--
Jeff - A055
Ready for FWF
Builders Log: http://www.N55XS.com
--
Checked by AVG Anti-Virus.
|