Peter Rees wrote:-
> If I need to extend wiring within the panel does anyone have an
opinion on they best method - at the moment, I can only really think of
hook type solder joints with heatshrink applied over the joint or, some
form of either single pole or multi-pole crimp connectors.
Peter,
Try the following series of links for hints on joining wires by
soldering.
http://www.aeroelectric.com/articles/PM_SS_Splice/PM_Solder_Sleeve_1.jpg
http://www.aeroelectric.com/articles/PM_SS_Splice/PM_Solder_Sleeve_2.jpg
http://www.aeroelectric.com/articles/PM_SS_Splice/PM_Solder_Sleeve_3.jpg
http://www.aeroelectric.com/articles/PM_SS_Splice/PM_Solder_Sleeve_4.jpg
http://www.aeroelectric.com/articles/PM_SS_Splice/PM_Solder_Sleeve_5.jpg
The 'PM' in the file name stands for "Poor Man's"
Regards
Kingsley Hurst
Mono Classic 281 in Oz.
|
