Thanks Tony, cablesafe it is then. One for the firewall and two for intake
housing.
Too late on the good advice of marking the cable and servo actuator. I
pulled the cable off a while ago to mount the servo on the tunnel. Crap. I
did manage to hang on to the spring!
Thanks again, Kevin
Hoping to fly by spring (season)
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Tony Krzyzewski
Subject: RE: Europa-List: 914 wastegate cable routing
>> Is this a job for those cable safe things I see in the 'spruce
catalog?
Yes, a cablesafe works really well with the wastegate cable. You'll need the
3/16" insert to capture the cable properly.
As you'll need to disconnect the cable from the servo to do this ensure that
you clearly mark the cable and servo actuator to get the cable back to the
same spot when you reassemble it.
Tony
---
---
|