Hi Ferg,
Sorry, the Queens English doesn't translate too well into Crazy Canook.
Wot I ment two rite woz....
The first pvc tape finnishes 1/2'' from the finnished paint line [ which is
1/8'' away from the flange edge] This tape stays on untill the end. On top of
the first tape, overlap the second piece of tape, which secures the polythene
sheet,[ this tape, and the poly' also stays on to the end....
The third piece of tape, which goes up to the paint line, as it is 3/4'' or
so wide, will overlap the first piece, to protect the outer edge.
This third piece, is the only one to be replaced during sanding / bonding /
filling / sanding / painting, as and when it gets damaged. The first two strips
of tape never get damaged.
Use quality [ 3M again, I don't have shares in 3 M, honest !] PVC tape,
cheaper ones may have adhesive which goes hard over a period of time.
Cheers,
Nev.
|