Eamonn,
I recall someone saying "don't reverse the direction of these motors". Now
this mightnt be your Navaid, but until you know you can do that, my advice
is "don't". Hope this may save you a buck.
Reg
Tony Renshaw
At 06:27 PM 4/20/2004, you wrote:
>
>I have installed the Navaid AP1 and Servo unit as per the Europa Mod, but
>the servo unit operates in reverse! When either the Trim or Turn pot is
>moved to the left, the stick moves to the right. If the aircraft is tilted
>to the left, the stick moves to the left. A bit worrying! There doesn't
>appear to be any means of switching the mode in the servo unit or AP1. I
>was going to try reversing the wires on the feedback potentiometer. Has
>anyone found this problem with their installation? how did you overcome it?
>
>Eamonn
>
>G-ROOV
>
>
>---------------------------------
>
>
|