Greetings all and happy new year!
Been working on the baggage bay supports lately and the time has come to
mount the wingtip strobe power supply and route the feed wires out the sides of
the fuselage.
Question for those who've come before me: Where is the best place for the
wires to exit the sides of the fuselage? My plan is to run the feed wires from
the power supply, located on one of the inner baggage bay supports, then route
the wires through the center tunnel and exiting near the CS15 bracket. I'm
planning to install Molex plugs so the wires can be disconnected when the wings
are removed. It appears that just behind the CS15 bracket at the bottom corner
there is enough room between the bracket and the gas tank for the wire to exit
without the potential of fouling the aileron linkage, yet still being within
the profile of the wing. Comments?
Regards,
John Lawton
Dunlap, TN
A-245
|