europa-list
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Europa-List: Tachometer connection for 914 to EIS

from [Paul McAllister] [Permanent Link][Original]
Subject: Europa-List: Tachometer connection for 914 to EIS
From: Paul McAllister <paul.mcallister@qia.net>
Date: Fri, 26 Dec 2003 10:52:02 

Hi all,

I was wondering if someone out there who has connected an EIS to a 914 can help
with the tachometer connection.  The Grand Rapids manual show a generic 912/914
connection, however when looking in the 914 installation manual it shows two
wires from the TCU for the tachometer.  Is this what is used for the EIS or
is it done differently. ?

Thanks,  Paul
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: Europa-List: Failed rudder horn?, Tony S . Krzyzewski
Next by Date:  Europa-List: Address change, DJA727
Previous by Thread:  Europa-List: Bing carburettor, altitude compensation discussion, John & Paddy Wigney
Next by Thread:  RE: Europa-List: Tachometer connection for 914 to EIS, G-IANI
Indexes:  [Date] [Thread] [Top] [All Lists]