Jeff,
I read on this forum that by applying heat with a heat gun (gently) you can
change the shape of the fairings. I have yet to do the wing root fairings.
How much Redux did you use to bond the fairings on?
I have the wing root fairings and the windshield yet to bond in place and am
wondering if I have enough Redux left. I only have about 1/3 of a can.
Kevin
A211 Monowheel
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of Jeff Roberts
Subject: Europa-List: Wing fairing problems
I have just attached my first wingroot fairing on to the port side wing. We
glued it and screwed it and placed it against the card stock taped against
the fuselage for paint spacing. Everything went well and we seam to have a
good fit however. The outer most edge of the flange curls back away from the
sides a bit in places. My question is how have others pushed this back or
should we just trim the outer flange edges back to where they touch the
fuselage again.
Any help would be greatly appreciated.
Thanks in advance,
Jeff
A258 Trigear
|