Europa-List: Re: Europa-List Digest: 4 Msgs - 10/18/03

[Graham Singleton <graham@gflight.f9.co.uk>]

><ian@swankie.co.uk>

Ian
depends how careful you are but since the resin may not yet be fully cured 
you could try peeling the glass layups rather than gring them off. 
Certainly try it on the top layers. A little help from a hot air blower 
would be useful too.
The only risk is over heating the main rib layup. Keep the hot air gun 
turned down to keep surface temperature below 60 Deg C
Graham 


---