> <hagargs@earthlink.net>
>
> In the process of installing the cooling duct for the 914. .
> . Pretty
> much straight forward until the instructions are read: "The
> assembled duct is fitted to the footwell using three bolts
> each side". Two sentences later. "A single AN3-5A bolt
> screws the side of the duct onto the inside face of the
> footwell using MS21047-3 anchor nut etc . . . " Page 4-2 of
> firewall forward manual. So what is it 1? 3?
I'd guess they are counting the two screws that go into the forward face of
each footwell through the angle brackets, in addition to the single screw
directly through the duct into the inside face of the footwell.
Dave DeFord
N135TD
|