I'm working through the 200 hour Rotax maintenance schedule on my 912UL, and
wondered
if anyone had the equipment needed for doing the individual cylinder compression
test that I could beg, borrow or hire? Also does anyone have the special
measuring tool that is used for checking the float arms in the Bing
carburettors,
also part of the 200 hour service?
Any help or suggestions gratefully received.
David
GBWJH
Visit SP at stand J06/L01 at the JEC Composites Show, Paris, 1st-3rd April 2003
**********************************************************************************************
All sales of goods are subject to the terms and conditions of sale (the
Conditions)
of SP Systems (the Company) which are available on request from the Company
or may be viewed on our Website (http://www.spsystems.com).
Any advice given by the Company in connection with the sale of goods is given
in good faith but the company only warrants that advice in writing is given with
reasonable skill and care. All advice is otherwise given subject to the
Conditions.
The contents of this message and any attachments are confidential and
are intended solely for the attention and use of the addressee only.
Information contained in this message may be subject to legal,
professional or other privilege or may otherwise be protected by other
legal rules. This message should not be copied or forwarded to any other
person without the express permission of the sender. If you are not the
intended recipient you are not authorised to disclose, copy, distribute
or retain this message or any part of it.
|