Paul,
Trust the design, It works well. I have no interference. The
reason for flat and round is you cannot use round head screws in both
places.
Jim
<paul-d.stewart@virgin.net> writes:
> <paul-d.stewart@virgin.net>
>
> Just been fittin the doors and their hinges this evening. Cant quite
> see why
> the side attached to the door is attached with countersunk screws
> and the
> side attached to the fuselage with AN 525-10R10 dome headed screws.
> It seems
> the door becomes hinge bound as it closes as the head of the AN525
> is too
> proud of the hinge. Anyone had similar experience or (as I'm
> thinking of
> doing) replacing them with countersunk versions.
>
> Regards
>
> Paul Stewart #432
>
>
>
>
> ===============
>
>
>
>
>
>
|