Is Grahams mod to the Rudder cable using the bellcrank already approved by the
PFA? where can I get the details and the parts please?
AlanB
#303
Quoting James Nelson <europajim@juno.com>:
> Cleve,
> However, the way the factory runs the rudder cables to the rudder is not
> the best way. It is ok but the original way of driving the rudder with
> a push pull tube is the best way. The orig. factory way puts all the
> rudder stresses on the bottom of the rudder. Note the lay ups ect. to
> make it work in the manual. Grahams way utilizes a bell crank mounted
> to the bulkhead in the back. The rudder cables go to that bell crank
> and terminate.
|