europa-list
[Top] [All Lists]

Re: Share wanted

Subject: Re: Share wanted
From: Greenroyd Stephen <stephen.greenroyd@cgey.com>
Date: Tue, 12 Mar 2002 16:10:42
Kevin

I have been think about building a Europa and would be interested in talking
to anyone in the area who would consider forming a syndicate.  I live in
Bingley which I guess could fall into your catchment area.

Best regards
Steve
espcrystalv@msn.com

-----Original Message-----
Subject: Re:  Share wanted


Dear All,

I am a group A pilot (200 hours) looking for a share in a Europa anywhere in
this region. I live near Driffield so York or surrounding area will be
ideal.

If there is anyone on this group or knows of anyone on the group please let
me know. Alternatively if anyone is looking to set up a new syndicate Im up
for that. I only need a minimum of one partner but more will be fine.

Kind regards

Kevin

kevin@eastyorkshire.co.uk

----- Original Message -----
From: "Graham Singleton" <grasingleton@avnet.co.uk>
Subject: Re:  Change this.. change that... do some more


> >. Come to put in the rudder cables and find out that they>
> >will do a wonderful job of sawing the fuel lines in half post haste. -"
> >Steve:
> >         Yes, yes, I had the same worry. You didn't say whether they were
> >3/8inch alum. like mine but the result is the same. I moved the pulleys
> >about a half inch further forward which allowed the cable route to rise
> >above the 3/8 lines.
>
> I buried the cables in a short tunnel of 2 ply BID, I would also suggest a
> length of Nyloseal nylon tubing over the cable . The fuel pipes went over
> the rudder cables not under. Don't forget the cables will go slack and
flop
> a little when your feet are off the pedals, normal in the cruise, provided
> your shoes aren't too big to fit between the pedals.
> Graham
>
>


********************************************************************************************
" This message contains information that may be privileged or confidential and

is the property of the Cap Gemini Ernst & Young Group. It is intended only for

the person to whom it is addressed. If you are not the intended recipient, you

are not authorized to read, print, retain, copy, disseminate, distribute, or use

this message or any part thereof. If you receive this message in error, please

notify the sender immediately and delete all copies of this message ".
********************************************************************************************


<Prev in Thread] Current Thread [Next in Thread>