Subject: | twisted spar |
---|---|
From: | ScramIt@aol.com |
Date: | Wed, 6 Feb 2002 07:36:38 |
Hi all, I'm working on placing the W18 plates. The two outboard plates are fine but the inboard (closest to the wing root) sits away from the rib at it's top. This is because the rib is twisted. The top of the rib has been setup square with the main wing spar and the bottom is square with the trailing edge. It looks as if someone took care to do this (it's marked out with marker) is this right? Thanks, SteveD |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: Bundling of coax cables, Dave Simpson |
---|---|
Next by Date: | Re: new forum, Bill & Sue Sisley |
Previous by Thread: | Airstrip safety., Paul Sweeting |
Next by Thread: | Antw: Re: Bundling of coax cables, Alfred Buess |
Indexes: | [Date] [Thread] [Top] [All Lists] |