Due to imminent immigration to Canada, the first stage of UK Kit No. 345
is for sale.
The kit has been completed up to page 50 of the manual (cutting trim
tabs) and the WIP has been signed off by Alan Thorne, PFA Engineer. It
was originally intended that the kit be shipped to Canada for onward
completion and is packed as follows:
RH Elevator assembly repacked into orig. foam blocks and corrugated
outer)
LH (ditto)
Rudder assembly (ditto with temporary metal reinforcing strip to
cut-out)
Unused fin foam cores (kit was pre Europa XS, intended to be completed
as XS)
1 bolt glass fibre UNI (approx 40%) used
1 bolt glass fibre BID (approx 40%) used
Tail metal work assembly (packed in foam blocks and wrapped)
1 box of other Europa components, resin, hardener adhesives, manuals,
etc.
1 box with containers of flox, lightweight filler, etc
1 box containing bags of finishing filler, etc.
Whilst it may still be possible to continue completion of the kit
(subject to PFA approval) it is more likely that the kit will appeal to
existing Europa owners for spares/damage repair, etc. However, the kit
must be sold in one lot and is therefore offered for a total of 600 -
buyer to collect from Farnham, Surrey.
The following is also offered:
1 sturdy and flat, workbench top 8=9200" x 2=920" made of 25mm MDF -
30
1 bottle of 'Alodyne' - unused - 10
Those interested please contact Chris Vowell at viridian@clara.co.uk or
phone 07973 179040
|