Hi all,
A couple of weekends ago I had to drill my wing pins and while I was about
it I did one of the pins for the flaps.
Although I had carefully marked it, the drill drifted a little to the hole
was off a bit. My question is should I go to the trouble of making a jig to
ensure I get the other pin on the exact same spot or is just measuring it
close enough.
I can't seem to see any adjustment in the system that ensures that the two
flaps track each other, is their one ?
Cheers, Paul (363)
Date: Sun, 3 Dec 2000 16:39:15 GMT
From: Majordomo@lists.flyer.co.uk
Subject: Majordomo file: list 'europa' file 'europa.0010'
--
|