>According with Aeroelectric and in contradiction with our manual the shield
>of magnetos wire should be grounded only at engine side. The other side
>should be attached to magneto switches.
>
>I am goint to use a keyswitch (Off-L-R-Both-Start). I will conect one end
>of the shield to the ground terminal of the keyswitch and the other end to
>the engine ground. In this way the ground of the keyswitch will be
>conducted exclusively through the shield to the engine ground. Is this a
>correct practice?.
>
>Thank you very much.
>
>Javier Barahona
>Builder 187
Try it any way you wish . . . but if you have ignition noise
in your audio system and/or radios then the technique suggested
is a possible cure. . .
|