You shouldn't wire contacts in parallel for additional loads. You may do so
for additional reliability but each connector must be able to carry the
entire load by itself.
Tony
-----Original Message-----
From: Graham Singleton <100421.2123@compuserve.com>
Date: Monday, November 16, 1998 9:20 AM
Subject: RS part No for wing connector
>Message text written by Edward Gladstone
>>contacts can be wired in parallel for higher loads.<
>
>don't forget, if one or more contacts fails you won't know until you check
>them all, or they start to overheat.
>
>Graham
>
|