>1. The seam is not level, but slopes upward, being about one inch higher in
>front than at the firewall.
We had the same "problem" which seems to be "normal".
>2. The front of the cowling is about 3/4 inch behind the front of the
>propeller drive flange.
Seems normal too, ours was even more behind so we lengthen
the cowlingflange at the firewall by about 1/2 inch.
>3. The exhaust pipe from the #1 cylinder comes within 1/4 inch of the
>cowling.
We have about 1/2 inch.
>4. The air filter will not fit inside cowling without modifying the
>cowling.
Can't figure out how you ended up in this situation.
Our fit is perfect.
Best regards,
Henk & Bart #264
http://www.loginet.nl/europa/
|