Following Tony K's calibration of the current tank, I thought it might be
worthwhile producing scales for both this and the "old" tank. The dxf's have
been posted to the ftp as TANKS.zip Only the outline of the zebra stripes
has been included to prevent an enormous byte count, so you will need to fill
them, and you might find you want to move them sideways closer to the scale
markings. The fonts and line thicknesses do not seem to travel too well
between different CAD packages and may need resetting. If you have sight
gauges on both sides of the tunnel, the scales can be easily mirrored before
printing.
Graham C. G-EMIN
|