>> can't see how you can actually control the pouring of a viscous
liquid to below 1gm.<<
The liquid shouldn't be that viscous. If it is it's too cold. I can pour to .2
gm relatively easily. Works great for 5 min. epoxy which behaves much better if
accurately mixed.
1 gm is OK if you are weighing out 100 gms. If you are weighing out 30 gms 1 gm
is 3% which I would be nervous about.
You can mix up a large amount, split it into batches and freeze the excess till
required, up to about 3 days.
Graham
|