Troy, Send them to the address below and I will get the gray ones ordered. What shade of gray? Light or Dark? cheers, Tim -- Timothy P Ward 12 Waiwetu Street, Fendalton, Christchurch, NEW ZEALAND Ph.
Troy, Better still, when you send them back, send a gray sample for the colour choice. Cheers, Tim -- Timothy P Ward 12 Waiwetu Street, Fendalton, Christchurch, NEW ZEALAND Ph. 0064 3 3515166 email w
Richard, Congratulation on the first flight!! and all the test flying done already. Yes, next time over will email you and come and see the finished product. Excellent work. Happy with the way it per
Richard, I put plastic P-Clips bolted to anchor nuts through the baggage floor. 6 all together, placed at each corner of the rectangle shape and 1/2 way along the longest side. Then use "bungees" (bu
Eddie, I would fill it again with Polyfiber, as you can do over the smooth primer, and than sand it back. When filling it I used a flexible metal trowel about 2 feet wide to run it down the spar, ben
Richard, Many thanks for the invite. I will keep you informed of my next trip and look forward to seeing the finish product. Cheers, Tim -- Timothy P Ward 12 Waiwetu Street, Fendalton, Christchurch,
Kevin, Use the backlight by pressing the ON button lightly once for the first level of backlighting, and twice for the second level of backlighting. In the instructions. Cheers, Tim 2 transponders bo
Hi Europa colleagues, I have just been testing my Micro 760 VHF with the strobes on and have some RF interference. I have 2 self contained strobes, one on top of the fuselage and the other directly b
Umm, on my Europa the aileron hinge is on the bottom surface. Don't tell me I have built my ailerons upside down and haven't flown yet!!! Cheers, Tim -- Timothy P Ward 12 Waiwetu Street, Fendalton, C
Europa Builders. Finally coming to the end of the project before ZK-TIM (#292 Monowheel Classic ) hopefully takes to the air shortly. During building I have included these accessories to my aircraft
Sorry folks, if interested, I can send you the attachments containing the photos. Cheers, Tim -- Timothy P Ward 12 Waiwetu Street, Fendalton, Christchurch, NEW ZEALAND Ph. 0064 3 3515166 email ward.t
Brian, Many thanks for the interest in the fuel filler pipe. I will be over in Londontown on the 5th 6th and 7th, so I can bring it with me then. Easiest way to pay is to post a cheque to me to the a
Brian, Payment in Sterling is OK. Will give you a phone when in Londontown. Many thanks, Tim -- Timothy P Ward 12 Waiwetu Street, Fendalton, Christchurch, NEW ZEALAND Ph. 0064 3 3515166 email ward.t@
Brian, Back home now and your 20 pound notes has been received with thanks. Cheers, Tim -- Timothy P Ward 12 Waiwetu Street, Fendalton, Christchurch, NEW ZEALAND Ph. 0064 3 3515166 email ward.t@xtra.
John, Your cheque has arrived with thanks. Cheers, Tim -- Timothy P Ward 12 Waiwetu Street, Fendalton, Christchurch, NEW ZEALAND Ph. 0064 3 3515166 email ward.t@xtra.co.nz Mobile 025 2649325
Jeff, That is what I have set up.In Summer the air intake is through a hole in the front bottom cowling opposite the hole for the Air Shroud (912S). Directed by 2" scant tubing through the firewall v
Europa Builders, I will be off to the USA shortly.If any builder requires an Aluminum Fuel Intake Pipe, as seen on the PhotoShare web site below,(under Timothy Ward--Europa) then let me know. Cheers,
Mike, I have just been to see Bob Archer from Torrance City to buy a COM/VHF aerial and Transponder aerial from him for a fellow Europa builder. I asked him about the ELT aerial. He confirmed what I
Andy, A set of PERMA GRIT tools is essential for composite work. Masking tape, clamps and a good practical mind. All the best for the build, it's great fun. Tim Tim Ward 12 Waiwetu Street, Fendalton,