I bought some brass bar from the local DIY Store B&Q, in UK, drilled and tapped
them myself.
Alan
On 13 May 2011, at 17:36, William Daniell wrote:
>
> Can anyone send me a picture of their bus bar/advise me on the best option.
>
> The ones that come with the Europa wiring kit seem to be plastic domestic
> terminal blocks with one side (as it were) liked by wires/ring terminals
> (Crimped not soldered ;-)).
>
> the wiring seems to me to add another point of failure whereas a straight
> copper bar would eliminate this - indeed one of the crimped connections was
> not crimped and I had to redo it.
>
> Thanks
>
> Will
>
>
>
>
>
|