I am considering Vertical Power to simplify fusing and wiring. Has anyone used
this system? http://www.verticalpower.com/
Bill McClellan
-----Original Message-----
>From: Kingsley Hurst <kingsnjan@westnet.com.au>
>Sent: May 13, 2011 6:18 PM
>To: europa-list@matronics.com
>Subject: Re: Europa-List: Bus bar
>
>Will,
>
>As with so many things in life nowadays, there are many alternatives.
>
>I chose the Bussmann fuse block as depicted in the following link. This
>unit
>has its own bus bar (dual bus if required) that feeds up to 32 fuses. Mine
>is the 20 fuse model. Only one wire needs to come through the firewall or
>two if separate feeds are required for the dual bus.
>
>http://www.aeroelectric.com/Mfgr_Data/Fuses_and_Current_Limiters/Bussman/15710_Fuse_Panel.pdf
>
>I fitted mine as per the attached.
>
>Cheers
>Kingsley
|